Inspection Information:
Facility Type: | Swimming Pool/Waterslide (>19 sq.m) |
Inspection type: | Routine |
Inspection date: | July 14, 2021 |
Follow-up Required: | Yes |
This facility was given a low hazard rating.
More information on hazard ratings.
Chlorine (Total) 1.96 ppm |
Chlorine (Free Available) 1.20 ppm |
Chlorine (Combined) |
Bromine (Free Available) |
pH 7.59 |
Total Alkalinity 91 ppm |
Total Hardness |
Temperature 33.4°C |
Clarity Clear |
Cyanuric Acid |
Violations:
A summary of the violations found during the inspection are listed below.
Code | Description / Observation / Corrective Action |
101 | Critical Improper Water Chemistry/Water Clarity Observation: The free available chlorine of the leisure pool at a temperature of 33.4°C was measured to be 1.25 ppm, 1.22 ppm, and 1.12 ppm at three different test location. The average disinfectant level was calculated as 1.20 ppm, which is less than the required concentration (minimum 1.5 ppm) for a pool of >30°C. (Health Significance) – Low disinfectant levels at higher pool temperatures can increase the risk of waterborne diseases due to a higher chlorine demand (caused by faster depletion of free chlorine). A higher concentration of free chlorine is required to maintain adequate disinfection. Corrective Action: Ensure disinfectant level is maintained at 1.5 ppm or higher. |
205 | Improper Monitoring of Chemical Paramaters or Safety Tests Observation: Some of the pool reagents for the Taylor test kit were past their expiry date. (Significance) - Expired reagents can give inaccurate results when used to test water chemistry (ie. pH, free chlorine, etc.) and must be replaced before their expiry date. Corrective Action: Ensure test kits are maintained, and reagents are replaced before expiration. |