Kitwanga Ambulance Station - Inspection Report

Inspection Information:
Facility Type:  WS3
Inspection type:  Routine
Inspection date:  May 10, 2018
Follow-up Required:  Yes

This facility was given a low hazard rating.
More information on hazard ratings.

Violations:
A summary of the violations found during the inspection are listed below.

Code   Description / Observation / Corrective Action
316   Source unprotected and subject to contamination
Observation: Tighter seal and mounding around well base is required.
Corrective Action: Ground surrounding well should be sloped away from well (with an impermeable soil) to prevent the potential contamination of surface water reaching well. To be completed by August 2018. .
319   Inadequate Chemical Analysis Data
Observation: Chemical Analysis data is not up-to-date; last chemical sampling was conducted on October 25th 2011.
Corrective Action: As an Operating Permit Condition, Chemical Sampling is required every 5 years. Chemical sample results, from a BC Accredited lab should be supplied. Contact your Environmental Health Officer for more information.