INSPECTION REPORT
Health Protection
RSHA-CG3K9F
PREMISES NAME
Meraki Studio
Tel: (604) 306-7270
Fax:
PREMISES ADDRESS
4498 46B St
Delta, BC V4K 2M9
INSPECTION DATE
July 6, 2022
TIME SPENT
0.7 hours
OPERATOR (Person in Charge)
Antonia Adamopolis
NEXT INSPECTION DATE
1 Month
INSPECTION TYPE
Routine
ACTION TAKENPSE SERVICE TYPES
ADMINISTRATIVE
Information Provided
ENFORCEMENT
Nail Services, Esthetics
HAZARD RATING FOR YOUR FACILITY: Low (≤15) Total Score = 9
Critical Hazards: There are no critical hazards.
Non-Critical Hazards: Total Number: 1
222 - Adequate hand washing stations and/or hot and cold water not provided
Observation: Handwash station is currently not functioning.
Corrective Action(s): Handsink is required to be reinstalled - hot/cold running water, liquid soap/single use towels required.
Violation Score: 9

Follow Up to "Critical" Violations Noted on Previous Inspections (if applicable): No corrections entered
Comments

Services provided:
-> Manicure/Pedicure/Waxing

Disinfection:
- High Level Disinfection: (Nippers/cutters, etc.)
- All implements are to be washed (scrubbed with soap and water) prior to disinfection.
- Pre-Empt CS-20 is currently not being utilized at this time.
Bleach is currently beining used. (100 ml bleach to 900 ml water is required.)
- Footbaths: Single use liners are being used for each tub.
- ie: Footbaths are to be cleaned routinely. Fill and drain basins. Chlorine utilized for Foot Bath disinfection. (Follow guideline for dilution: 1 part bleach to 49 parts water/20 ml chlorine per 980 ml of water.)
- Sanitary Facilities: See Violation notes.
- Sanitation: Acceptable.
- Recommend - hands are to be washed prior to treatments. (clients/service providers.) Nails are to be examined for infection prior to service.
- Single use items utilized. (nail files, tongue depressors, etc) DO NOT REUSE ITEMS!!
- Laundry services on site. Ensure all items (towels/linen) are washed after each client. Recommend hot water wash and hot dry cycle. Bed liners are to be changed after each client.
- Credo blades: Currently not being used.

Reinspection is required to be conducted.